Sunday, December 6, 2009

Ceramic capacitor

ceramic capacitor is a two-terminal, non-polar device. The classical ceramic capacitor is the "disc capacitor". ceramic disc capacitors are in widespread use in electronic equipment, providing high capacity & small size at low price compared to other low value capacitor types.


Ceramic capacitors come in various styles:

1.disc, resin coated, with through-hole leads
2.multilayer rectangular block, surface mount

3.bare leadless disc, sits in a slot in the PCB and is soldered in place, used for UHF applications
4.tube shape, not popular now

 Classes of ceramic capacitors

Class I capacitors: accurate, temperature-compensating capacitors. They are the most stable over voltage, temperature, and to some extent, frequency. They also have the lowest losses. On the other hand, they have the lowest volumetric efficiency. A typical class I capacitor will have a temperature coefficient of 30ppm/C. This will typically be fairly linear with temperature. These also allow for high Q filters -- a typical class I capacitor will have a dissipation factor of 0.15%. Very high accuracy (~1%) class I capacitors are available (typical ones will be 5% or 10%). The highest accuracy class 1 capacitors are designated C0G or NP0



Class II capacitors: better volumetric efficiency, but lower accuracy and stability. A typical class II capacitor may change capacitance by 15% over a -55C to 85C temperature range. A typical class II capacitor will have a dissipation factor of 2.5%. It will have average to poor accuracy (from 10% down to +20/-80%).


Class III capacitors: high volumetric efficiency, but poor accuracy and stability. A typical class III capacitor will change capacitance by -22% to +56% over a temperature range of 10C-55C. It will have a dissipation factor of 4%. It will have fairly poor accuracy (commonly, 20%, or +80/-20%). These are typically used as decoupling or in other power supply applications.